Jinan glass door is a product with good light transmittance, but some friends reported that the glass door is prone to mildew after a period of use. Do you know the reason for the mildew on the glass door? How to quickly clean the mildew from the glass? Do you know the specific method? Next, let's have a look!

一、我們來看看玻璃門表面產生霉斑的原因

1、 First, let's look at the causes of mildew on the surface of glass doors

濟南玻璃門的成型是一個工業問題。發霉的主要原因是玻璃生產過程中含有一些堿金屬離子。為了降低成本，在傳統熔融法制備玻璃制品的過程中，選擇純堿作為熔劑，導致玻璃制品在一定條件下(俗稱模具)容易風化。玻璃成型(又稱防堿)是由于儲存時間長或天氣潮濕而引起的化學反應。

The molding of Jinan glass door is an industrial problem. The main reason for mildew is that there are some alkali metal ions in the glass production process. In order to reduce the cost, soda ash is selected as the flux in the process of preparing glass products by traditional melting method, which leads to the easy weathering of glass products under certain conditions (commonly known as mold). Glass forming (also known as alkali proof) is a chemical reaction caused by long storage time or wet weather.

在陽光的照射下，它的表面會出現彩虹、霉菌、水印、油印、紙紋等。玻璃在門上的成型通常發生在浮法玻璃的空氣表面(上表面)，因?yàn)楦》úＡУ南卤砻媾c錫液接觸，表面滲透著一層薄薄的錫，保護著玻璃。

Under the sunlight, rainbow, mold, watermark, mimeograph, paper grain and so on will appear on its surface. The molding of glass on the door usually takes place on the air surface (upper surface) of float glass, because the lower surface of float glass contacts with tin liquid, and a thin layer of tin permeates the surface to protect the glass.

二、濟南玻璃門表面霉斑怎么去除?

2、 Jinan glass door surface mildew how to remove?

1.調整氫氟酸(HF)與水的比例1:8，擦拭玻璃。注意：一定要防腐蝕，皮膚一定不能接觸HF，否則會嚴重腐蝕!擦完玻璃后，用清水再擦一遍，然后擦干玻璃。

1. Adjust the ratio of hydrofluoric acid (HF) to water 1:8 and wipe the glass. Note: be sure to prevent corrosion. The skin must not contact HF, otherwise it will be seriously corroded! After wiping the glass, wipe it again with clean water, and then dry the glass.

2.用氫氟酸(HF)擦拭，注意1比8的比例，輕松去除玻璃模具。

2. Wipe with hydrofluoric acid (HF), pay attention to the ratio of 1 to 8, and easily remove the glass mold.

濟南玻璃門出現發霉，主要是因?yàn)樗膬?chǔ)存環境有問題，長時間的經歷風吹雨打，出現霉斑也很正常，我們?cè)谑褂玫臅r(shí)候，好好的維護清理就可以了，關于清理的方法，上述內容中也已經為大家詳細的總結完，大家可以參考應用

The moldy glass door in Jinan is mainly due to the problem of its storage environment. It is normal to have moldy spots after a long time of wind and rain. When we use it, we can maintain and clean it well. The above contents have also been summarized in detail for you. You can refer to the application