The installation of glass partitions is very common. More and more people choose to install partitions in the office to facilitate access. After all, glass has good partition performance and can facilitate user application, but only correct installation can better reflect its role. So, what should manufacturers pay attention to when installing doors? What details need to be considered?

1、固定隔斷

1. Fixed partition

在框架組裝后的預安裝過程之后，隔斷需要進一步固定。例如，許多螺栓需要一個接一個地固定，以防止框架中的型材移動。當然，在某些情況下需要焊 接框架，以防止框架不穩定和錯位。安裝隔斷時，應注意保護隔斷的完整性，防止隔斷因外力而損壞。然后，在固定隔斷之后，如果發生任何事故，需要進一步仔細檢查，從而完成玻璃隔斷的安裝。

After the pre installation process after frame assembly, the partition needs to be further fixed. For example, many bolts need to be fixed one by one to prevent the profile in the frame from moving. Of course, in some cases, it is necessary to weld the frame to prevent instability and dislocation of the frame. When installing the partition, pay attention to protect the integrity of the partition and prevent the partition from being damaged by external forces. Then, after fixing the partition, in case of any accident, further careful inspection is required to complete the installation of the glass partition.

2、安裝前，組裝框架

2. Assemble the frame before installation

當隔斷被用作隔板時，因為它是一種易碎的材料，它需要一個堅固的框架來保護它。可以在安裝隔板之前預先安裝框架，并且可以在平坦的地面上組裝和形成整個或部分結構，以便于安裝和固定。當然，如果隔板的安裝面積相對較大，不適合預先安裝隔板，可以沿地面、墻面和中間位置安裝框架。固定地面、墻壁和頂部，然后逐步安裝隔斷。安裝框架時，應注意對準一開始繪制的位置線，以免安裝錯誤。

When the partition is used as a partition, because it is a fragile material, it needs a strong frame to protect it. The frame can be installed in advance before installing the diaphragm, and the whole or part of the structure can be assembled and formed on a flat ground to facilitate installation and fixation. Of course, if the installation area of the diaphragm is relatively large and it is not suitable to install the diaphragm in advance, the frame can be installed along the ground, wall and middle position. First fix the floor, wall and top, and then gradually install the partition. When installing the frame, pay attention to align the position line drawn at the beginning to avoid installation errors.

3、安裝先定位尺寸

3. Positioning dimension before installation

每一次裝修都會涉及到尺寸，玻璃隔斷的安裝也不例外。在設計之初，有必要確定安裝的具體 位置，一旦位置清楚，就開始測量尺寸。在安裝地面上畫一條定位線，然后在墻面或柱子上畫一個高水平的位置線。畫線時，注意盡量減少誤差，以免給安裝程序帶來不必要的麻煩。需要反復復核現場的實際尺寸，以保證安裝位置的準確性和選材尺寸的準確性。

Every decoration will involve size, and the installation of glass partition is no exception. At the beginning of design, it is necessary to determine the specific installation position. Once the position is clear, start measuring the size. First draw a positioning line on the installation ground, and then draw a high-level position line on the wall or column. When drawing lines, pay attention to minimize errors to avoid unnecessary trouble to the installation program. The actual dimensions of the site shall be rechecked repeatedly to ensure the accuracy of installation position and material selection dimensions.

這是玻璃隔斷安裝中需要注意的一些細節處理方法，相信經過上述介紹大家對門有了一定的了解。建議您在購買時多注意比較，選擇質量好、售后服務好的廠家進行安裝，方便后期的使用，以免買到劣質產品，不利于使用。

These are some details that need to be paid attention to in the installation of glass partition. I believe you have a certain understanding of the door after the above introduction. It is recommended that you pay more attention to comparison when purchasing, and select manufacturers with good quality and after-sales service for installation, so as to facilitate later use, so as not to buy inferior products, which is not conducive to use.