自動感應門是現代建筑中常見的一種門型，無需推拉或開關門，它可以通過感應門口的人體、車輛等物體自動開啟門，方便快捷。然而，由于自動感應門較為復雜，需要科學維護，下面介紹一些濟南感應門維修檢查的方法。

Automatic sensing door is a common type of door in modern architecture, which does not need to be pushed or opened or closed. It can automatically open the door by sensing objects such as humans and vehicles at the entrance, making it convenient and fast. However, due to the complexity of automatic induction doors and the need for scientific maintenance, the following are some methods for repairing and inspecting Jinan induction doors.

1、檢查感應器是否出現故障

1. Check if the sensor is malfunctioning

不同感應門的感應器存在差異，但是通常故障的原因可能是灰塵積聚、電源線松動、電池電量不足等，需要及時更換或修復。

There are differences in the sensors of different sensing doors, but the common causes of faults may be dust accumulation, loose power cords, low battery power, etc., which need to be replaced or repaired in a timely manner.

2、檢查門機是否出現故障

2. Check if the door machine is malfunctioning

開合自動門的門機是一種自動裝置，可能會出現輕微損壞，導致門的自動開關不暢，需要檢查門機的驅動系統，以確保門機指令響應及時。

The door operator for opening and closing automatic doors is an automatic device that may be slightly damaged, resulting in poor automatic opening and closing of the door. It is necessary to check the driving system of the door operator to ensure timely response to door operator commands.

3、檢查門的電源系統是否正常

3. Check if the power system of the door is normal

自動感應門的電源系統是自動感應門的基礎，需要保證通電。如出現斷電、過熱等情況，需要檢查電源線是否損壞、接線是否松動，及時修復。

The power system of the automatic sensing door is the foundation of the automatic sensing door and needs to ensure power supply. In case of power outage, overheating, etc., it is necessary to check whether the power cord is damaged and whether the wiring is loose, and repair it in a timely manner.

4、檢查門的安裝質量是否合格

4. Check if the installation quality of the door is qualified

如果門的安裝質量不合格，自動感應門可能會受到壓力或其他破壞，導致門的自動感應失靈，需要重新安裝或加強支撐件。

If the installation quality of the door is not qualified, the automatic sensing door may be subjected to pressure or other damage, causing the automatic sensing of the door to malfunction and requiring reinstallation or strengthening of the support components.

維修自動感應門需要技術齊備合格的維修人員，不能自行瞎折騰。如果自行維修不當，可能導致門的損壞，甚損害人身。

Repairing the automatic sensing door requires skilled and qualified professional maintenance personnel, who cannot tinker with it on their own. If self repair is not done properly, it may cause damage to the door and even harm personal safety.

為了確保自動感應門的正常使用，定期維護和檢查安裝系統，及時故障，可以有效地避免自動感應門出現問題的情況。同時，使用自動感應門時需注意保持門的車,行人物品不要接觸門扇，防止門扇受損。更多相關事項就來我們網站http://www.7789822.cn咨詢！

In order to ensure the normal use of the automatic sensing door, regular maintenance and inspection of the installation system, timely troubleshooting, can effectively avoid problems with the automatic sensing door. At the same time, when using automatic sensing doors, it is necessary to pay attention to keeping the car and pedestrians' belongings away from the door leaf to prevent damage to the door leaf. For more related matters, come to our website http://www.7789822.cn consulting service